We offer a full line of Racor Products, including:
	Racor offers a wide range of silicone - treated, pleated paper, Teflon (TM) and synthetic hydrocarbon separator cartridges. The high performance separator cartridges are specially designed, tested and qualified to work with Racor coalescer cartridges and are interchangeable with standard industry separators. End cap mounting configurations are compatible with Facet, Faudi, Kaydon and Velcon.
	Racor Pleated Media Filter Cartridges are manufactured with high grade silicone-treated media and synthetic fibers. Filter cartridges are available in the most popular lengths or they can be stacked to meet end user requirements.
	Pleated synthetic media cartridges are specifically designed for high flow applications where long life, high efficiency filtration is required. This product family offers up to 3 to 4 times the life of glass and cellulose composite filter elements and efficiency of 99.7% of its micron rating.
	The Racor Hydrocarbon 2" (51 mm) outside diameter FMI Series cartridges are available in standard lengths 5", 10", 15", 20", 25" and 30". Designed to flow from the outside to the inside at a rate of 1-gpm (3.79LPM) per lineal inch with 1-micron nominal filtration. Tested and qualified to less than 5 lpm of free emulsified water. FMI Series 2" cartridges are designed to monitor the fuel quality and shut down the fuel flow when hit with a slug of water. Designed with no metal components and glass filled nylon end caps, makes this product environmentally friendly.
	Racors' new FBO-10 and FBO-14 filter assemblies are designed to meet the toughest hydrocarbon refueling conditions and provide for ease of filter change outs. The FBO Assembly can flow 25gpm/951lpm or up to 75gpm/2301lmp depending upon the model, the elements installed and the fuel being filtered. The FBO Assembly can be used on mobile refuelers or installed in refueling cabinets. The unit can also be used for diesel fuel dispensing pumps or as a primary fuel filter/water separator for large diesel engines. The assembly features a locking ring collar, which attaches the filter housing to the aluminum die-cast filter head with four bolts. The slotted locking ring collar allows maintenance personnel to hand-loosen the four collar bolts, rotate the lower bowl assembly for element change outs. With the new element installed, simply raise the bowl and rotate into position on the locking ring and hand tighten evenly.
	The versatile FBO-10 and FBO-14 filter assemblies have three element options to meet most field applications. For refueling applications the filter separator element is used. The filter separator element removes contaminants and water from jet fuel, aviation gas, diesel fuel, gasoline and hydrocarbon fuels. Silicon treated cellulose prefilters remove particle contaminants down to one micron. Absorptive filters remove water and contaminants from fuel, oil or other hydrocarbon streams.
	Racor RVFS Series filter vessels offer a versatile, economical alternative to competitors' vessels. Industry applications include removing liquid and solid contaminants from diesel fuel, gasoline, kerosene, aviation gas, jet fuel and other lubricating or hydraulic oils. RVFS vessels utilize proven filter design technology and can be used as coalescers, pre-filters, monitors or separators by changing internal components or flow direction or by selecting optional filter cartridges when ordering. Element choices include coalescers, separators, particulate, clay bags, pre-filter or water absorbing cartridges.
For more products or information please contact your nearest Keller representative or click here to visit the Racor website.