We offer a full line of Picses Products, including:
	PISCES Primary Flexible Fuel Pipes are designed for underground conveyance of flammable liquids, including gasoline, alcohol, and gasoline-alcohol blends. Primary Pipe is shipped on reels and is typically cut to length on site for each piping run. PISCES™ female swivel pipe couplings (PFC) are permanently swaged onto each pipe end. The couplings mate with PISCES™ Tees (PFT), Elbows (PFL) and Adaptor Fittings (PFA) to make the appropriate connections to standard thread (NPT or BSPT) valves, pumps, tank fittings, and dispenser risers.
	The PISCES Double Wall Access/Containment Pipe and PISCES AP UL listed Access/Containment Pipe is used to provide retractable access to, and containment of, PISCES Primary Pipes. AP30 provides containment of SP15 and CP15 Primary Pipes; AP40 provides containment of SP20 and CP20 Primary Pipes and dual runs of PISCES Fuel Oil Pipes.
	The PISCES Flexible Vent and Vapor Piping System is designed to provide a convenient means of venting underground storage tanks (USTs) and returning vapors to the UST from vapor recovery dispensers. Vent lines consist of PISCES 2" AP20 or 3" AP30 piping connected between the extractor fitting in the UST and the vent stack riser elbow. Vapor recovery lines consist of PISCES AP piping connected between the tank and the outlet of the vapor shear valve in the dispenser. PISCES non-metallic VPC vent line couplings are used to adapt each end of the AP Piping to a female threaded fitting. VPC Couplings thread directly into extractor fittings and elbows. The AP pipe is then simply inserted into the couplings and clamped in place.
	PISCES Dispenser Sumps are installed beneath fuel dispensers to provide access to, and secondary containment of, dispenser plumbing, emergency shear valves, and underground piping connections. PISCES Stabilizer Bar Kits are installed in PISCES Dispenser Sumps to provide reliable support for boss-mounted emergency shear valves.
	PISCES Wide-Access Dispenser Sumps feature a contractor-friendly, open-top containment chamber for unrestricted access to the piping connections during installation. The custom dispenser mounting frame is installed after the plumbing is complete. Wide-access sumps are ideal for multiple product dispensers with small footprints as well as master, satellite, and combo dispensers in truck-stop applications.
	PISCES Special Application Sumps are installed below grade and provide a convenient means of housing a multitude of underground piping connections and equipment, including: valves, filters, meters and pumps. The PSL-3830 Line Connection Sump has large horizontal flats to accommodate multiple piping entries. The PSL-3630 Tall Mini-Sump has long vertical flats to accommodate applications with varying pipe entry heights, including the VacuRite Out-of-Tank Check/Drain Valve. The PSL-2430 Short Mini-Sump is ideally suited for retrofitting submersible pumps. Please contact us to determine the correct model for your application.
	PISCES Multi-Purpose Above-Grade/Below-Grade Transition Sumps provide a convenient means of housing the connections required when transitioning from aboveground steel piping to non-metallic PISCES underground piping. These sumps are also well-suited for providing access to, and environmental protection and containment of, underground valves, filters, meters, pumps, line connections, and piping manifolds.
	PISCES Bolted Flex-Flange Entry Fittings are installed in sump walls to seal the entry of fuel pipes, conduits, and vapor pipes. Bolted flange fittings require an entry hole to be cut and a bolt pattern to be drilled in the sump wall for installation.
	PISCES Primary Pipe Fittings connect PISCES Primary Pipes to pumps, valves, dispensers and tanks. A Female Swivel Pipe Coupling (PFC) is permanently swaged onto each pipe end with a PISCES Coupling Machine (CM). The couplings mate with PISCES Tees (PFT), Elbows (PFL), and Adaptor Fittings (PFA) to make the appropriate connections to standard thread (NPT or BSPT) valves, pumps, tank fittings, and dispenser risers. Please call to ask about OPW’s unique and newly designed S.S. Coupling, Elbow and Tee now available to Canada!
	PISCES Test Boots are used to isolate and air-test the interstitial space between the primary and secondary pipe. One (1) Test Boot is required for each pipe end. Separate Test Boots are not required when using entry fittings with integral Test Boots.
	PISCES Sump mounting flanges are used to mount PISCES tank sumps to 4" and 6" underground storage tank bung fittings. Flange top (FT) models provide added flexibility in positioning of pump or extractor outlets. The riser or extractor is threaded into the top flange. The top flange is then oriented and bolted to the mounting flange. Extended body (E) models provide added clearance at the top to prevent interference with tank or hold-down straps.
	Please use this chart or feel free to contact us to find the best PISCES Entry Fitting for any application.
	Please use this chart or feel free to contact us to select your PISCES Dispenser Sumps and Pan Selections.
For more products or information please contact your nearest Keller representative or click here to visit the Pisces website.